To estimate garden fence panels, divide the length you want to fence by the usable installed width of one panel, round up to a whole panel, then convert panels into packs. The difficult part is choosing the right measurements: a product’s overall width is not always its joined coverage.
This is a worked calculation guide, not an automatic calculator. Use the examples to build your own shopping list, then confirm the result against the chosen fence’s assembly drawing. Our garden fence measuring guide explains how to take the measurements on site.
Write down these four numbers
- Length of each separate run: measure along the actual proposed fence line.
- Openings: deduct the gaps that will remain unfenced.
- Installed coverage per panel: use the joined width, allowing for the connection design.
- Panels per pack: count complete panels, not brackets, stakes or assembly sections.
Keep all measurements in the same unit. A 3.6m bed is 360cm; mixing 3.6 with a 60cm panel width gives a meaningless result. Do the working in centimetres, then convert to metres for your sketch if that is easier to read.
Example 1: a straight border with an opening
Imagine a 360cm border with a 60cm access gap. The fenced length is 360 − 60 = 300cm. Suppose the chosen panel has a verified installed coverage of 60cm. You need 300 ÷ 60 = 5 panels.
If the panels come in packs of five, that is one pack. If the gap separates the run into two sections, calculate those sections individually as well: a total of 300cm could be divided into lengths that do not each fit whole panels. The example coverage is hypothetical and is not a specification for Metro Elegance’s fence.
Example 2: why corners can change the quantity
| Side | Length | Calculation | Whole panels |
|---|---|---|---|
| Front | 230cm | 230 ÷ 60 = 3.83 | 4 |
| Left return | 130cm | 130 ÷ 60 = 2.17 | 3 |
| Right return | 130cm | 130 ÷ 60 = 2.17 | 3 |
Rounding each side gives ten panels. Dividing the combined 490cm by 60cm and rounding once gives nine. The difference matters because a panel does not automatically turn a corner partway along its width.
Even ten panels do not guarantee a precise fit: the front would cover a nominal 240cm and each return 180cm. You must resolve that excess with a compatible connection layout, a different panel size or a revised bed outline. Rounding up tells you a minimum whole-unit quantity; it does not make fixed panels adjustable.
Example 3: convert panels into packs
For a layout needing 12 finished panels, a five-panel pack means 12 ÷ 5 = 2.4 packs, rounded up to three. You would receive 15 panels and have three left over. Decide whether those spares are useful for a matching section or whether another product gives a better fit.
Metro Elegance’s decorative metal fence set contains five pieces and lists a 59.5 × 62cm panel size. This pack count is useful for ordering; the size label alone does not establish the usable connected width. Use the connected panel dimensions when planning the run, rather than multiplying an overall product dimension by five.
Allow for the shape of the garden
For curves, measure the intended line with a flexible tape or a hose that you subsequently measure straight. A rigid panel creates a series of straight segments, so a smooth curve on paper becomes a segmented curve on the ground. Check how far the connectors actually articulate before choosing a tight radius.
For slopes, measure along the proposed installation route and inspect the ground at the joins. A horizontal drawing can hide changes in level. Keep gates, drain covers and the route for a wheelbarrow as separate labelled spaces rather than adding a vague extra allowance.
Your final order sheet
Record the product, colour, pack size, each run length, each opening, installed panel coverage and the resulting pack quantity. Draw the corner connections. This turns an approximate perimeter measurement into a plan you can assemble.
Browse garden fence panels with that sheet beside you. Once the layout fits, follow our soil installation guide to set out the border without losing access to the bed.